• Spindle material is SCM415 full hardened through carbonizing heat treatment.
  • NST#30/R8 spindle with 3HP inverter motor
  • Meehanite licensed castings are annealed and stress relieved to ensure maximum precision and vibration absorption.
  • Hardened and ground C5 grade ballscrews pre-tensioned to minimize backlash, providing high precision movement and reducing heat deformation on all axes.
  • Positioning accuracy: ±0.008mm/300mm
  • Repeatability accuracy: ±0.005mm/300mm
  • Telescopic steel way covers on three axes to protect ways and ballscrews from chips and coolant.
  • High grade Turcite-B is coated and with precise hand scrapping to maximize wear resistance.


iPRO Intelligent Conversational Control System


  • Intelligently integrates the control, machine and person.
  • Optimized HMI + PLC + Motion + COMM.
  • iPRO system enables you to program conventional machining operations right at your machine in an easy programming way.
  • iPRO system was designed for users where manual and automated operation are both useful and needed.
  • Built in functions: parameter memory, visual communication, USB connectivity, coaching program and coordinate adjustment record.
  • Powerful, easy and user-friendly. Great for your daily milling work.

DRO mode 

  • Built in DRO mode provides DRO functions for your milling work. With this function, you are no longer have to spend extra money on DRO equipment for your machine.


  • Program the iPRO by making simple selections and inputting parameters in numbers.

Program Storage

  • An internal drive lets you save hundreds of typical programs. A USB port on iPRO is available to plug in a storage device for backing up programs and moving programs between iPRO and computers.

Help pages

  • Help pages are available for you to check different useful information quickly.


  • Even if you have never used a CNC before, you will be able to learn the iPRO in just a few hours. It is easier to operate with an iPRO than to use manual machining methods. You’ll quickly find out having the iPRO will pay off in job satisfaction.

Task scheduling

  • You are able to schedule 999 different machining tasks.

CAD/CAM input

  • Easily transfer your 2D CAD/CAM codes into the system by using USB flash drive.
  • Allow you to do milling work by following your 2D CAD/CAM design .
Specification iB-610
X/Y/Z travel 610/350/460mm
Spindle nose to table surface 100~560mm
Spindle center to column surface 430mm
Table size 710 x 350mm
Table T-slot (No. x size) 5 x 16mm
Max. table load (kgs) 350kgs
Spindle taper NST#30/R8
Spindle speed (RPM) 5000RPM (60Hz)
Quill feed 0.04/0.08/0.14mm
Transmission Variable speed (inverter)
Quill travel 127mm
Head swivel (R&L) +/- 45
Rapid feed rate XYZ (m/min) 12m/min
Spindle motor 3HP
XYZ motor 1Kw AC servo motor
XYZ transmission Direct coupling
Coolant pump 1/6HP
Machine size
Overall width (A) 2200mm
Overall depth (B) 1700mm
Overall height (C) 2050mm
Net weight  2600kgs

We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.