- Gear box is lubricated by forced lubrication system.
- Gears, spindle shaft and key are made from chrome molybdenum steel SCM415H.
- Grade JIS 1 carburizing harden and precise grinding to ensure running precision and long duration.
- High grade casting is annealed and stress-released, providing high rigidity and wear resistance.
- Hardened and ground double-nit ballscrews on 3 axes, providing high precision movement, and reduce heat deformation.
- XYZ slideways, table and T-slot are hardened and ground.
- Dovetail on X slideways, box ways on Y and Z.
- 3 ways are coated with turcite-B.
- 1:2 ratio timing belt boxes on XYZ to increase drive torque and save cost for axes motor.
- XYZ axes driven by servo motor, standard with pendant control box, and individual buttons for each function allows the operator to work with ease.
- YZ steel way covers protecting slideways and ballscrew from dust and coolant.
|Table size (L x W)||2200 x 500 mm (86.61" x 19.69")|
|T-slot (Number x Size)||18 x 5 x 85 mm (0.71'' x 0.20'' x 3.35'')|
|Longitudinal travel||1600 mm (62.99'')|
|Cross travel||700 mm (27.56'')|
|Vertical travel||700 mm (27.56'')|
|Table load capacity||1000 kgs|
|Spindle nose to table surace||70~770 mm (2.76''~30.31'')|
|Spindle taper||NST#50 Gear head|
|Spindle speed||50Hz Low: 104~466 High: 308~1400
60Hz Low: 125~560 High: 370~1100
|Spindle speed step||6 steps|
|Spindle center to column surface||700 mm (27.56'')|
|XYZ axes feed rate||0~750 mm/min (0''~29.53'')|
|Rapid traverse XYZ axes||12 M|
|Spindle motor||10 HP|
|X,Y,Z motors||DC 1200W|
|Coolant pump||1/6 HP|
|Air Press||6 kg / cm2|
|Power needed||12 kw|
|Machine Length (A)||2930 mm (115.35'')|
|Machine width (B)||3200 mm (125.98'')|
|Machine height (C)||2530 mm (99.61'')|
|Net weight||4500 kgs (9921lbs)|
We reserve the right to modify and improve the specification without notice. The specification shown above is for reference only.